Search results

yes i did ,but unless you are going racing or rallying you may not need two ,after all the original system worked fine for normal use ,or you could use the original fan should you need it.

Hello I just recieved mine ,it came early.Very nicely made with larger cooling capacity, should work well in the dessert.

Auto doc have Valeo clutch kits

Type D is for modern Renaults Dacia and some Nissans, yours will aprecaite Bluecoll or similar and distilled water around 40/60 mixture and change every two years.

Hope it is just oil filter.

renault 4 for restoration good body engine runs ,new front brakes /master cylinder /bottom swivels. Longerons and rear axle mountings good ,needs new floor.and probably repaint. 6 volts and 3 speed .e mail for more info. Also other second hand spares for sale

Most large supermarkets sell it ,probaly easier .You can choose. I use Total Transaxle 75/80 ,two litre bottle from Leclerc

Autodoc have drive shafts for your car as Homegrown said but they are not as cheap as that, i just bought an S K F one for 65 euros ,they also do not want the old one back, and they are not handed. Hope this helps.

Check your plug gaps and points gap make sure they are ok, warm up engine ,slacken the dizzy and very slowly turn it until the engine is running the smoothest and fast lock it off You should then adjust the idle on the carb. Is this a new dizzy?

Yes long long gone !!

Thanks for the reply, how much is it ? and where abouts are you.? Regards

Hello Is this the g/box from a F6 with a cleon engine ? My g box is h a o 163 , the drive is pale blue with 19 teeth , i am after a replacement Dont know if you can help many thanks . Nigel

The rear lights that resemble the saloon ones are off the R4 fourgonet ,shorter than R4/6 .The mounting is different from the car so will not fit the body. Hope this helps.

Oscaro have 5 different makes on line , plus any good tyre shop will get you some. Unfortunately Michelin no longer produce the original tyre

Steering rack shim ,probably.

No you do not need a lead substitute for R4 as alloy heads have hard seats ,exhaust valves in cast iron heads are where you get valve seat recession .As for ethanol ,that is a differnt problem .

Hello I am looking for the cog in the g/box that drives the cable .It is for F6 van with cleon engine g/box hao 163. New or s/hand ,any info greatly apreciated . Many thanks

mister auto has them if you have the 1100 engine ,they are original valeo who are ducelier.

Yes, both drive shafts are the same.

There should not be any customs between England and France if you have bought european parts, they go straight in the post or on the carrier. The carriers are catching up with the backlog now, i just got a parcel from Germany overnight!