Clementine's Garage
Clementine the Cat
 
Image of flower
Yellow R4
 
Réparateur d'automobiles

Here it is, my R4 :)

Nikswe

Enthusiast
Messages
14
Location
Serbia
Lets start from begining of story about this car, 10 years ago i was driving daily R4 and of course like most of us i was dreaming about putting R5 alpine engine in it.Few years later i have change car for another one or third one and time was passing pretty fast.Some changes came to my life and one day in 2018 i saw accidently R5 alpine atmo engine on ebay, for a good price.I was thinking lets buy it, its a rare engine, it is not so much money and i can keep it just in case if i decide to make R4 alpine one day.So I brought it and started thinking about what should i do with it.
 
  • 20190215_190151.jpg
    20190215_190151.jpg
    99.3 KB · Views: 15
  • 20190215_192810.jpg
    20190215_192810.jpg
    196.5 KB · Views: 15
....few days later, before even engine came to my adress.

Hmmmm, one day? Hahah, that plan didnt last so long, but i had another problem.My old Renault 4 is in very bad condition, i stop using it 7 or 8 years ago and if i will use this engine i need to rebuild it.Rebuilded gordini engine deserves decent body/chasis without rust, and i didnt had time,energy and motivation to do restoration on car, so this game just came to another level.Plan was to fix engine and start searching for best R4 i can find in my country, and that was not easy task to do.

20190215_193550.jpg20190215_193604.jpg20190219_204512.jpg20190219_215100.jpg20190223_205923.jpg20190223_211718.jpg20190223_211727.jpg
 
  • 20190223_213342.jpg
    20190223_213342.jpg
    71.1 KB · Views: 4
Soon as i open engine i was very dissapointed, because engine was sitting only with water inside and of course cylinder head and engine block has been frozen with ice inside and make cracks on it.
 
  • 20190223_173905.jpg
    20190223_173905.jpg
    328 KB · Views: 4
  • 20190223_205941.jpg
    20190223_205941.jpg
    409.9 KB · Views: 4
Well done Nik - you seem to be using several rooms in your house to rebuild your engine :clapping: Best of luck, that was unfortunate with the cracks in your first Alpine engine :(
 
Good job finding a rare engine and keep it up on restoring.
Just a small thing, I always thought the cylinder heads of the alpines atmo and turbo where different in casting, hight of valve stem guides, diameters of valve push rod holes, diameters of cooling channels and they've different camshafts....
cullas12.jpg
It looks to me you've got a AT cylinder head on an atmo, but maybe the differences are within tolerance, though the camshaft looks as it has been beaten...
 
Hmmmm, i knew that my second cylinder head is from alpine turbo, and that heads are not exactly the same, but i was believing that they fit without any problems/consequences .Now i wonder do i have problem or not?I had problem with adjusting valves, but i didnt understand why is so big difference in height beetwen old settings and after assembling of engine.Now i know for different height of cylinder heads.

Camshaft is not great, but anyway soon i will put catcams camshaft with adjustible chain sprocket and complete different intake/ exhaust setup and some stuff more.

Does anyone know is it same volume of combustion chamber on cylinder heads?I believed that difference in compresion of turbo / atmo engine is only in pistons, now i am confused :(
 
Here are the different types of engine mounted on R5 ALPINE and R5 ALPINE turbo:

R1223 (R5 Atmo):
840-7-25: compression ratio 10: 1

R122B (R5 Turbo):
840-C-7-26 / C6J-7-28 / C6J 7-50: compression ratio 8.6: 1

Here are the different characteristics of cylinder heads according to the engine types:

840-7-25:
Height: 79.30mm
Combustion chamber volume: 43cm3

C6J-7-50 1st model:
Height: 79.80mm
Chamber volume: 45.30cm3
Joint thickness: 1.4mm (there is a mark J on the cylinder head)

840-C-7-26 / C6J-7-28 / C6J-7-50 2nd model:
Height: 79.30mm
Chamber volume: 43cm3
Joint thickness: 1.9mm

Here are the different camshafts according to the engine types:

840-7-25 / C6J-7-28
Camshaft diagram: 30-72-72-30
Inlet open before TDC: 30
Inlet close after BDC: 72
Outlet open before BDC: 72
Outlet close after TDC: 30
With 0.3mm theoretical valve clearance

840-C-7-26 / C6J-7-28 / C6J-7-50
Camshaft diagram: 10-54-54-10
Inlet open before TDC: 10
Inlet close after BDC: 54
Outlet open before BDC: 54
Outlet close after TDC: 10
With 0.4mm theoretical valve clearance

Valve clearances (cold):
840-7-25;
Inlet 0,20mm
Outlet 0,25mm

840-C-7-26 / C6J-7-28 / C6J-7-50;
Inlet 0,25mm
Outlet 0,30mm

Respect the position of the valves in their seats:
All angles are 90 degrees.
valve seat length (mm) (X):
- Inlet 1.5 to 1.8
- Outlet 1.7 to 2
R5 AenAT klepzitting.jpg
 
Last edited:
The pistons are also different between the atmo and turbo, it looks you have turbo pistons.

At mecaparts http://www.mecaparts.com/Moteurs/page.php?lang=0&sortie=html&col=R5&page=1#ok you can order the correct parts needed for the specific type of engine

Left: R1223 (R5 Alpine atmo) Right: R122B (R5 Alpine turbo):

MP0186.jpg
MP0176.jpg


When you use the turbo pistons on an atmo you create a lower compression ratio so performance drops, because a turbo or compressor provides the extra power and higher compression ratio.
On the other hand don't use atmo pistons on a turbo to create a surplus compression ratio, good chance that pistons, push rods and more cracks as it ain't made of the wright materials and it isn't designed for mixing wrong parts!

My advice is to rebuild your engine as it was originally designed for, so everything works well.
Either you build an R1223 engine or you build a R122B engine.
 
Last edited:
Thanks everyone for all informations!

According to upper details combustion chamber is same beetwen 840 725 atmo and 840 726 turbo engine, which is good for me because i want to keep original compression ratio.

About difference i dont believe that this 0,5mm height difference can make some problem because most likely it is wider in middle of cylinder head because of bigger coolant channels or simmilar.Even intake and exhaust valve are same size on both heads, only i am not sure for ports but on turbo engine can only be bigger.

I still have old cylinder head and i have friend with dismounted turbo head, so soon i will compare nicely.
 
Here it is part no. 2 of my story :)


second engine block


IMG-20191130-WA0016.jpeg
 
  • IMG-20191124-WA0002.jpeg
    IMG-20191124-WA0002.jpeg
    139.1 KB · Views: 6
  • IMG-20191123-WA0037.jpeg
    IMG-20191123-WA0037.jpeg
    154.9 KB · Views: 6
  • IMG-20191217-WA0011.jpeg
    IMG-20191217-WA0011.jpeg
    96.2 KB · Views: 6
  • IMG-20191217-WA0014.jpeg
    IMG-20191217-WA0014.jpeg
    83.3 KB · Views: 4
carburetor...
 
  • 20191223_154529.jpg
    20191223_154529.jpg
    165.6 KB · Views: 1
  • IMG-826929e74171fba48ea268f0e75d63ef-V.jpg
    IMG-826929e74171fba48ea268f0e75d63ef-V.jpg
    178.9 KB · Views: 2
  • IMG-72b656d418cc904ebe29c020749633fa-V.jpg
    IMG-72b656d418cc904ebe29c020749633fa-V.jpg
    149.6 KB · Views: 1
  • IMG-65a24e4de384465442ef8b6661b0983b-V.jpg
    IMG-65a24e4de384465442ef8b6661b0983b-V.jpg
    152.9 KB · Views: 1
  • IMG-7e8f643b39bc613176689fd698ffa084-V.jpg
    IMG-7e8f643b39bc613176689fd698ffa084-V.jpg
    95.2 KB · Views: 2
  • IMG-883eae01f0ed113ec8d43ab14df92190-V.jpg
    IMG-883eae01f0ed113ec8d43ab14df92190-V.jpg
    199.9 KB · Views: 2
  • IMG-9bf0a2b149ada7b79813f7dff9634c37-V.jpg
    IMG-9bf0a2b149ada7b79813f7dff9634c37-V.jpg
    128.8 KB · Views: 2
  • IMG-6305065c39e130624b5a45f74cdcd528-V.jpg
    IMG-6305065c39e130624b5a45f74cdcd528-V.jpg
    116.5 KB · Views: 2
  • IMG-a47dad56cac0f63860406a625b7e7394-V.jpg
    IMG-a47dad56cac0f63860406a625b7e7394-V.jpg
    138.8 KB · Views: 2
  • IMG-3297e3547b11363f9598bc242d52a4b6-V.jpg
    IMG-3297e3547b11363f9598bc242d52a4b6-V.jpg
    186 KB · Views: 2
Your work looks very good. I'm looking forward to seeing the project.
 
some new parts including oil pump
 
  • IMG-20191228-WA0002.jpg
    IMG-20191228-WA0002.jpg
    86.8 KB · Views: 1
  • 20200101_144314.jpg
    20200101_144314.jpg
    168.2 KB · Views: 1
  • 20200103_224755.jpg
    20200103_224755.jpg
    83.2 KB · Views: 2
  • 20200103_223807.jpg
    20200103_223807.jpg
    93.3 KB · Views: 2
  • 20200103_223812.jpg
    20200103_223812.jpg
    68.2 KB · Views: 2
  • 20200103_223914.jpg
    20200103_223914.jpg
    75.7 KB · Views: 1
  • 20191220_013331.jpg
    20191220_013331.jpg
    83 KB · Views: 1
Meanwhile i brought 5 speed gearbox HA1-01 from R5 mk1 already converted for R4 and aluminium rims
 
  • 28700945_1891759764202068_7256884709266719657_o.jpg
    28700945_1891759764202068_7256884709266719657_o.jpg
    358.9 KB · Views: 5
  • 20191223_192718.jpg
    20191223_192718.jpg
    131.8 KB · Views: 6
After painfull cleaning of engine block, time came for assembling.I have ordered crankshaft bearings by oem number, which means that i kept standard size.


IMG-20191217-WA0011.jpegIMG-20191123-WA0039.jpeg
20190228_215552.jpg
IMG-20191129-WA0000.jpeg

Here you can see difference before/after cleaning pistons, i have avoided sandblasting pistons with purpose to keep as much as possible closest original measurements.More than three hours was needed to clean several times all four pistons with different chemicals and teeth brush.But even that was nothing comparing to cleaning camshaft tunel in engine block.That was not so funny job to do :)

20191231_023945cc.jpg20200103_030021.jpg
 
  • IMG-20191217-WA0011.jpeg
    IMG-20191217-WA0011.jpeg
    210.1 KB · Views: 1
  • IMG-20191123-WA0039.jpeg
    IMG-20191123-WA0039.jpeg
    296.6 KB · Views: 1
During dissasembling of engine, i didnt had time to make tool for removing crankshaft chain sprocket so i have cut chain. Of course it was not possible to mount new chain without separating sprocket from cranskaft, and now was a moment to do it.20200102_163121.jpg20200102_182456.jpg
 
Next step is oil pump, and aftermarket one was not a option in my case.Finding new genuine was impossible so i did one trick.I did research on google which cars have similar oil pump with cleon engine block and i have started looking on ebay.Soon i found one with same main part number as alpine atmo, which means that oil gears are same diameter and length, but suction pipe was different.That was not a problem, i decide to use pipe from old one and combine what i need.I have remove sieve and cleaned together with pipe and mounted new rivets.20191231_024931.jpg20191231_024947.jpg20191231_025003.jpg20200103_002421.jpg
 
Back
Top