Search results

Finally the electrics are all working and the instrument panel is back in position. I wanted to get the dash in too but I'm still waiting for the washer jets to arrive. A tidy up should probably be next on the list. The screen wash pump was leaking from it's body. I had a spare but it...

Some had Ducellier. But the Femsa was more common in the UK.

The inner pulley on my R5 TX with the dual belts came already attached to the new waterpump. I don't think it is removable.

The head is aluminium. It's really common for waterpump bolts to snap and that doesn't write off the cylinder head.. Maybe youtube for ideas how to extract the broken bolts. It's difficult to make suggestions without photos of the problem. Doesn't the pulley unbolt from the waterpump?

I fitted the new heater hoses (they weren't a good fit) and tried bleeding the cooling system. I don't remember changing the coolant after buying the car but the coolant that came out was clean. I was worrying I would find rusty stuff and bad cylinder liners after all this time. I realised...

I've attached a PDF of the wiring diagram for a 1973 car which is probably close enough. Renault copyright but I'm sure they won't mind us using it to keep their cars alive for 50 years.

If turning the mixture screw out too far made the car easier to start that might suggest something is blocking the fuel when the choke is closed. It would be worth removing the top of the carburettor and cleaning out any residue in the bottom of the float chamber and cleaning out the jets...

You do have a dynamo not an alternator. The dynamo is DC and needs the voltage regulator box mounted on the firewall. An alternator charges in AC and has an internal rectifier that does away with the need for the regulator box. So you are looking good. Which wires are you trying to figure...

De Marco are wrong. The system changed with Brexit and the end of the common VAT system. After 2021 we now pay VAT in the UK on imported goods and should not be charged VAT in the source country. It's all a pain but the European suppliers who have worked it all out will have registered...

The wheels are ready. I got lazy and had someone shotblast and paint them. They ended up costing £38 each. The ones without the hole in the middle are early van wheels for the Rodeo. The rest are for Claude.

Drive by noise?

That's curious. The power when the ignition is on for the 1979 to 1981 cars it should be connected to the fuse to the right of where your fingers are in the photo. What year is your car? And do you have the wiring diagrams to check the connector locations are correct? You will need a...

I've got the 845cc engine with dog leg 1st gear gearbox. It came with a mis-matching pair of driveshafts with CV joints and they were worn. The CV joint type are best if you can find tham. I've fitted a pair of old stock driveshafts with the double universal joints outboard (the bean can...

The 1400 cylinder heads are very rare. Do you have a photo of the damage? Maybe there could be another fix.

I'm getting on well with the electrics. Nothing worked so I started going through all the earths and power feeds and they all seemed OK. Turns out everything really was broken. The new rear earth loom fixed the rear lights and I've ordered a new flasher unit to fix the indicators. A...

It's been 8 years since I last did any work on the Rodeo. I remember it being almost finished - work so far covered on https://www.renault4.co.uk/rodeo-mot.htm I've pulled the cover off again and it is still an odd looking thing. The electrics were misbehaving which is why the instrument...

Looks like a 1979-81 model. Do you have a wiring diagram that you can use to check if the the wires are in the right place? The Haynes manual (1961 to 1986 version) has a wiring diagram you could use. The positive connection to the coil looks like it should be direct to the ignition...

I've not been following welders for the last 10 years or so. Might be worth asking on mig-welding.co.uk/forum/ for suggestions. I've got one of these: https://www.weldequip.com/portamig-mig-welders.htm Big old school thing that has a lower minimum amp setting than you would ever need even...

Is the petrol old? Mine isn't starting well after 4 years off the road and I think the problem is stale petrol.

The tyres arrived at the tyre shop and the wheels are off for shotblasting and painting. That stack of tyres is all for me. I have too many cars.