747 cc piston, rings and liners

[Alex Selwood]

Remember Ornella? She has thrown a piston...and I need to find a replacement, with liners and rings as well. Can anybody out there help me? :cry::cry:

 

[malcolm]

Hi Alex - had a quick check of the usual suspects and found these: http://www.franzose.de/en/Renault/R4/Kurbel-Nockenwelle-Kolben/ANR80060/ They are 850cc but have the smaller gudgen pins. Would need someone to confirm that they would fit your block/conrods. Cooler to find the 747cc stuff though.

 

[Alex Selwood]

Thanks malcolm. I will call tomorrow and let you know

 

[ggcton]

If you are stuck ring Robin Redrup the 4CV registrar and spares coordinator for the RCCC.He should be able to help you.
I do have a piston and liner set for the 750 4cv but Robin would have to check compatability.

Robin 01480 434984


Gary

 

[altatlock]

Franzose cat no 80059 for680-1 block 747cc279.00 eur.Thats the next step for me! Im thinking of going over with a shopping list,best of luck Alan

 

[Alex Selwood]

Thank you all. Have contacted robin today and am waiting to see what happens. Fingers crossed will let you know.

 

[Butterchurn]

R4 - R4L Piston & Liner Set.

Hello from Australia.
I have a new 747 piston & Liner set in the waxed paper in the can.

'Ensemble MONOLUX'
Ref # 13 90 24
Renaul R4-R4L
4 Pistons & Chemises

COMPLETE = pistons, liners, gudgeons, rings' circlips & all copper seals.

Got out of 4's years ago; thus surplus to requirements.

Drop me a line. geoffreyshouse@iprimus.com.au

Ciao: Mick.

 

[Geoff in the Gully]

Hello from Australia.
I have a new 747 piston & Liner set in the waxed paper in the can.

'Ensemble MONOLUX'
Ref # 13 90 24
Renaul R4-R4L
4 Pistons & Chemises

COMPLETE = pistons, liners, gudgeons, rings' circlips & all copper seals.

Got out of 4's years ago; thus surplus to requirements.

Drop me a line. geoffreyshouse@iprimus.com.au

Ciao: Mick.

Hi Mick
If Alex doesn't want your piston set I know someone here in Melbourne restoring a 750 and Dauphine who would.

Geoff

 

[Butterchurn]

OK Geoff: understood.

Mick.

 

[Butterchurn]

Piston Diameter.

Please see photos regarding Piston Diameter.

On the Vernier appears around 54.5 mm.

 

[Butterchurn]

64 843cc

Parting is such sweet sorrow!

 

[iMacThere4iAm]

Big lorry for a small car!

 

[Butterchurn]

Only fitting for an Aristocrat!