Search results

Geoff they came out with the 334. 354 didn't come until the pleine air was replaced by the rodeo.

Foofighter, a zenith 28IF carb from a GTL will fit OK on an 850. The only things that are really different to the 850 are the jets and they're hardly different at all. You will maybe have to plug up some of the emission control pipes from the carb depending on what are fitted to your car.

I just bought some of the orange front lenses. Absolutely terrific. Incredible value for money. By the way, Renault did the clear ones in plastic as well as glass. Piet

Hi, given its a body part you may not have any luck with Renault as they didn't do the body parts. If Melun retro-passion in France can't help I'd suggest looking in the yellow pages for an automotive glazier- someone who does bus, truck, and panel van windows. They could cut a flat laminated...

Hey, we always knew it was economical, but it turns out to be waaaaay ecumenical too!

Hey Geoff from a fellow Melburnian, Ignore this if you already know but I found I can order heaps of R4 parts from the spare parts dept at City Automobiles in Richmond provided I can come up with a part number for them and they don't have to go searching. (Eg recently had to get new rear...

Hi Angel, thanks for weighing in ..... Rats! I was hoping that wasn't the case. When you say they are a tight fit, you don't know roughly how much can the inner end be pulled outwards from its detent before it gets solid? I don't want to pull a torsion bar out, but I might do a kinematic layout...

Thanks for the thoughts but... I think any other 334 will be just as stuffed. Plus if I put an unknown box in I'd be replacing seals and bearings as a precaution, to ultimately get something just as bad if not worse! Also, I have been double declutching for years now, and even doing that you...

Hello all, I am getting to the point where I will have to swap my gearbox. I have a late '67 4 speed car with a 334 gearbox which is losing all its synchros and a new 354 gearbox I bought from Renault some years ago in anticipation. So, you say? So far, so peachy, stop boasting... The...

The engine shown in the link is the renault 800-01 engine which is the export 845 cc engine used in 4's in the early 70's to eighties. It should confirm it on the engine ID plate on the distributor side of the block. These were the same as the car engines except they were fitted with a different...

I notice the Twizy has 13" wheels with 3 studs, and they fit 145/80 x 13 on the rear and 125 x 13 on the front, also they do both steel and alloy rims..... any chance of them having the right stud pattern/offset for an R4? Just curious

What I reckon you need is a remote booster as Malcolm said: this page shows some available in Australia, there would be local equivalents in the UK and Europe. http://www.hydroboost.com.au/boostertypes.htm I put one (or rather PBR, the OEM, did it)- a VH44- on the front circuit only of a...

Thanks very much for all your replies guys. I think if I did go ahead, I would try to emulate the original roof- which means I might well not go ahead! Cheers Piet

Hello all, I'm vaguely thinking about making a replica fabric sunroof for my '68 model, as the tin roof has quite a few bits of bog in it. I thought taking all the bog out and the requisite shrinking would be a very hard job to do well, whereas cutting out the centre pressing and raising the...

That looks great- what was the wheel colour???