Engine info please

[Simon P]

Could somebody give me the torque settings for mains and big ends for a 1983 4 GTL.
I have took the sump off Noddy, cleaned out the oil pump and sump,also i have checked a couple of caps,all is in good order so i can put it back together quicker than i thought.

Where is the best place to get 6mm fuel pipe that is bendy?

 

[malcolm]

Have you not got a Haynes manual? They are useful for this sort of thing and there are plenty on eBay. Having said that I can't find mine. From the 688 engine section of the R5 book it says big ends 35Nm and main bearings 64Nm.

You should be able to buy 1/4 inch copper fuel pipe and the rubber hoses to suit from your friendly local motor factor.

 

[Simon P]

I was planning to pick up the Renault workshop manual from my old garage but i can't get there till the weekend.Because the bottom end is good i wanted to get the sump back on and painted. Thank you for the settings.
Simon