Exhaust/inlet manifold.

[Cornish4]

Hello folks, on my recent trip to France I managed to pick up a Zenith 32IF carburettor, rocker cover and water pump to fit to Marigold to give her a little more umph. Unfortunately I didn't buy a manifold to suit it, thinking stupidly that I could just swap the carbs over with just opening out the bore of the inlet a bit, WRONG. Do any of you good folks out there have a manifold for a 1108cc engine with 65mm hole centres at the carb flange? Many thanks, Brian.

 

[Steve Hennessey]

Good on you Brian! Find a R5 with the 1108 engine and that manifiold will do. You need the R5 air cleaner box as well. Got some overhaul bits for the carb if you need them.

Look forward to some high performance

 

[Cornish4]

Hello Steve, I'm into a bit of modifying, Derek said I was a bit of an erbert, boy-racers in London are called this I believe. I will take his word for it. I did manage to get an air-cleaner box too, it's just the bl--dy manifold I'm short of, nothing important! Im interested in what overhaul stuff you have though, could you pm me please with details of what you have, and prices too. Many thanks, Brian.

 

[Steve Hennessey]

Eh - London, where's that? Look at my sticky post in Spares for Sale and you'll see them all listed. You may need to go back to France for that manifold - please bring me some wine back

 

[Cornish4]

I will check out your spares for sale Steve. Any excuse for a trip to France is fine by me, and I'm off there in October all being well to Loheac, so manifold and wine it is, if I don't find one in the meantime here.:smile:

 

[renault4mad]

hi Brian,
my little F4 has that carb on it...just taken it off and cleaned it

 

[Cornish4]

Yes I thought I could see that in the photo. Soon be on the road then.