french four
Enthusiast
- Messages
- 15
My r4 has developed a problem (1986 gtl), were the rear torsion bar meets the swinging arm, I think there must be a bush or bearing in there and it must of broke down because now when i go over the slightest bump there is a banging noise as if the whole bank end is loose, i got a mechanic to have a look and he confirmed the torsion bar is moving up and down in this area were it meets the swinging arm, can someone please confirm it is a bearing and if they are still available and i presume it will be a job far above my capabilities, will it need special tools to repair it. Any help/comments appreciated. Thanks in advance