the old girl needs to work

[carlosvandango]

head problem

could you please help me with the feeler gauge settings for my R4 and the sequence for the tappets and the torque down for the head and rocker cover

 

[carlosvandango]

Ive picked up a new gasket set for 96 euros and need a bit of help from you buddies to put her back to work.

 

[angel]

I saw in another post that you have an F6. Terefore it has the 1108cc engine. Tightening sequence:

8 4 1 5 9

7 3 2 6 10

when you are looking from the distributor side.
Tightening torques: Head 60Nm (better go on 3 stages: 1) 20Nm 2) 40 Nm 3) 60Nm). Let the engine run for 20 mins, let it cool down then loosen each nut half a turn and retighten to 60 Nm. Retighten again after 700-1000 kms.

Rocker shaft: 20 Nm

Valve clearances: Inlet 0,15mm Exhaust 0,20mm COLD