Rich Enthusiast Messages 177 Feb 22, 2011 #1 My gear knob spins round and round, how is it fitted? Does it come off? Please help!
A alewis Enthusiast Messages 561 Feb 22, 2011 #2 Im sure ive seen something similar elsewhere on the forum and it suggested something like turning it upside down and pouring glue in ?
Im sure ive seen something similar elsewhere on the forum and it suggested something like turning it upside down and pouring glue in ?
R reidalpine Enthusiast Messages 1,659 Feb 22, 2011 #3 should be press-fitted to a serrated surface on the gear-lever-as alewis says turn upside-down and pour some glue in there..
should be press-fitted to a serrated surface on the gear-lever-as alewis says turn upside-down and pour some glue in there..
angel Enthusiast Messages 2,448 Location Athens, Greece Feb 23, 2011 #4 I have fixed some of them with hot-melt glue. Remember to plug the lever tube end, because all glue will end there when you fit the knob!
I have fixed some of them with hot-melt glue. Remember to plug the lever tube end, because all glue will end there when you fit the knob!
