Sprackers
Enthusiast
- Messages
- 353
- Location
- Tunbridge Wells England
Hi there,
Dumb question but Ive placed one front wheel with tyre on, back on the ground and the other side ive jacked up.
I then put the centre hub nut (23 socket) and do it up but I get to a point and the drive shaft just turns but the opposite wheelwheel does not?
should it still do that with the wheel on the ground?
Does this mean ive done it up tight enough anyway?
Any help much appreciated
Sprackers
Dumb question but Ive placed one front wheel with tyre on, back on the ground and the other side ive jacked up.
I then put the centre hub nut (23 socket) and do it up but I get to a point and the drive shaft just turns but the opposite wheelwheel does not?
should it still do that with the wheel on the ground?
Does this mean ive done it up tight enough anyway?
Any help much appreciated
Sprackers