Over prevoius weeks, my car has developed an interesting problem:
timing is correct and points set at 57º dwell.
c.o. at tickover is 2.5
valve clearances and compressions are good, spark plugs new ish as is distributor cover and leads.
under heavy breaking and sometimes during enthusiastic cornering I get a misfire(emergency stops cut the engine but not difficult to restart)
recently cleaned and blown through carb and jets etc (was occuring before as well as after clean)
float is not punctured either
is this a common or known problem with the zenith 28 lf carb (manual choke)
as it seems centrifugal force is affecting mixture.
Thanks in advance.
timing is correct and points set at 57º dwell.
c.o. at tickover is 2.5
valve clearances and compressions are good, spark plugs new ish as is distributor cover and leads.
under heavy breaking and sometimes during enthusiastic cornering I get a misfire(emergency stops cut the engine but not difficult to restart)
recently cleaned and blown through carb and jets etc (was occuring before as well as after clean)
float is not punctured either
is this a common or known problem with the zenith 28 lf carb (manual choke)
as it seems centrifugal force is affecting mixture.
Thanks in advance.