kylenorth18
New Member
- Messages
- 2
Hi there,
We're having a problem with our r5 with the zenith 32, which I understand a lot of you have fitted to your r4's as a power upgrade!
We can't seem to find how to adjust the idle on our carb.. it's very high on ours and we're off to France in a couple of days so ideally it needs to go down.
We've found the mixture screw but this seems to make no difference to idle and we can't find an idle speed screw?
I'm guessing the fast idle speed screw isn't one for adjusting..?
The Haynes manual is pretty useless..has a couple of diagrams of this carb but no descriptions of how to adjust it
The timing is set up right as is the dwell angle.
Would greatly appreciate any help with this (despite not being a r4 ) thank you!
We're having a problem with our r5 with the zenith 32, which I understand a lot of you have fitted to your r4's as a power upgrade!
We can't seem to find how to adjust the idle on our carb.. it's very high on ours and we're off to France in a couple of days so ideally it needs to go down.
We've found the mixture screw but this seems to make no difference to idle and we can't find an idle speed screw?
I'm guessing the fast idle speed screw isn't one for adjusting..?
The Haynes manual is pretty useless..has a couple of diagrams of this carb but no descriptions of how to adjust it
The timing is set up right as is the dwell angle.
Would greatly appreciate any help with this (despite not being a r4 ) thank you!