Clementine's Garage
Clementine the Cat
 
Image of flower
Yellow R4
 
Réparateur d'automobiles

Bottom end and connecting rod bearing size

Bflorian

Enthusiast
Messages
15
Location
Serbia
Helo, I want to buy new bearings for the crankshaft and connecting rods, but I don't know what size they are. It's a Renault 4 GTL 1.1 from 1990, and I also idk how to measure what size i need and stuff in case it's not a universal thing.
I'd appreciate any help.
 
It will depend on whether your crankshaft has ever been reground- you won't know until you open it up and measure it. Also depending on condition it may need a regrind anyway.
 
It will depend on whether your crankshaft has ever been reground- you won't know until you open it up and measure it. Also depending on condition it may need a regrind anyway.
Well, I have it opened up, and it has not been reground at least I didn't regrind it. I just did a slight 'cleaning' with a little bit of 600 than 1000 sandpaper and then steel wool, so just verrryy veryy slightly
 
At der Franzose (Germany)

At R-Quatre (Netherlands)
 
At der Franzose (Germany)

At R-Quatre (Netherlands)
Thank you
 
Back
Top