R4 Zenith Carb

[Pete Isom]

Hello

Ive bought a carb for my R4 its a zenith 28 bought from a member here(no issues)
im getting ready to clean and install, anyone have any recomendations on parts or kits?

also i think the fuel feed or maybe a crank breather recirculation copper pipe is not present, before i try to remove the old one anyone have one laying around?(left top of pic)

Thanks

 

[laxeian]

Hi, on your carb the only thing missing was a metal sleeve that went into the main carb body casing rocker cover side, this fitted inside the carb body then connected to the plastic ‘t’ on the rocker(with restriction in tube) and to the vacuum, reason it is missing is because 32 fitted now came with a broken ‘t ‘ plastic piece of a different orientation to the ones now available, used sleeve in tubing on new install, here’s a now photo, On original install with your carb and original rocker it was just sleeve/plastic ‘t’ /one vac to rocker with restriction inside, other to manifold below carb.

 

[Pete Isom]

Okies, wanted a back up plan if i broke mine during disassembly

 

[laxeian]

Bit blurry, but as it came.

 

[DAA]

I have done an revision in a same carb..

I share some pics, you can check and compare with your carb.