AndyMcDonnell
Enthusiast
- Messages
- 18
- Location
- Spain
I am currently replacing every 354 gearbox seal on my Spanish R4 1.1 GTL. What an oily aged on mess! However nearly, there I cannot remove the speedo drive to peplace the seal. Haynes has no info on extraction. Tried pulling from outside, twisting from inside but scared to break. Photos of removed gearbox end cover and oil leak. I have removed the speedo cable holding bolt fully. Is the little indent on the top of the plastic insert, in line with the securing bolt a clue? A lever or tap point. I’m stumped, if it should just fall out it sure is ceased - the gear obviously still turns and works. Any advice greatly received - Merry Christmas to our Renault 4 family from sunny Spain.