What carb, distributor?

[snes]

Hi
If I can possibly post another noobs question - my 86 Gtl 1.1 - when ordering service items, I need to supply distributor make. I would also be happy to know which carb I have (Zenith - but which one?)
Where would I look on these parts to find out?
Thanks for all your patience!

 

[reidalpine]

your Zenith should have an alu.id-strip fastened by one of the 4 screws on top of it.. possibly it says type/number stamped on side of it too.. Dizzy should have stamped brand and type on it's side..

 

[snes]

Thanks Reidalpine - I'll have another rummage. So far, the dizzy only seems to have writing on the black vacuum advance bit. Maybe I need to lean in a bit further!

 

[pepper]

The Dizzy number is imprinted in the case and is quite difficult to see!

 

[reidalpine]

snes-mine had the numbers on the (in)side towards the block so had to use mirror to see it .... This is one of those times it'll be necessary to Really Bend Over. - much nicer than doing this at the doctor's c",) -R

Oupps!-Thanx much for vinyl BTW