Latest activity

Before taking out the pistons and measuring the piston ring thickness, don't take anything you have read for granted. There had been...

Hi... strangely enough I have also this week purchased a DRK - I assume R6 based as it's got front discs and a 1108cc engine It's not...

Thanks a lot for thé replies. , Laxeian the situation you describe is exactly what happened to me with one motorbike I restored some...

Thanks a lot for thé replies. , Laxeian the situation you describe is exactly what happened to me with one motorbike I restored some...

It'd be worth checking these: - The nuts on the carb base - Is the pipe to the manifold in place? In the carb top: - Needle...

Hi Steve Have you checked the hose with the one way restrictor valve in it? The hose runs from the back of the base of the...

Yes, the capacitor is often over-looked as a cause of erratically running engines. Worth investigating and testing by substitution with...

Before taking out the pistons and measuring the piston ring thickness, don't take anything you have read for granted. There had been...

You can enquire to Renault Classic with the chassis number and they may be able to provide you the "fiche d' usine" - the data sheet for...

Hi Steve Have you checked the hose with the one way restrictor valve in it? The hose runs from the back of the base of the...

It'd be worth checking these: - The nuts on the carb base - Is the pipe to the manifold in place? In the carb top: - Needle...

Thanks for the input. Vacuum and mechanical advance working fine. Elec ignition fitted so condenser issue bypassed. I am under tge...

Continuing the work on the front beam. Lining up the beam, maintain the symmetry with the chassis and drilling the holes at the bottom...

Continue the story above… Flipped the chassis and again welds were sealed and 3 layers Brantho Korrux were applied. Then the work of...

The rebuilding can begin, but first you have to find the parts that have been sitting in the shed attics for years, and then you...