-
And ongoing with the rebuild. The rear crossmember annex fueltank mount fits nicely into place. Just freshen up the threads before we... -
malcolm replied to the thread F6 Van, brake pedal push rod.You should feel when the rod contacts the master cylinder. When it goes from free travel to acting against something. Normally the... -
BBarnster replied to the thread F6 Van, brake pedal push rod.The eezybleed works fine but once bled there is no action from the peddle when pushed - hence the quetion regarding the length of the...
-
malcolm replied to the thread F6 Van, brake pedal push rod.The rear needs to be on the ground for bleeding because of the proportioning valve that limits the rear brakes. Or sit the rear drums...
-
JdeW replied to the thread R4 GTL 1985 Restoration.And ongoing with the rebuild. The rear crossmember annex fueltank mount fits nicely into place. Just freshen up the threads before we... -
-
BBarnster replied to the thread F6 Van, brake pedal push rod.Yes, new front discs/pads, caliper seals flexis and bleed nipple. Rear, new shoes, drums and cylinders. No leaks with pressure bleed.
-
Hi all I've recently acquired this 1985 van, which was imported from France in 2018 and appears to have been well cared for and... -
I have also got a Richbrook outdoor cover (F4 van), and happy with so far - it's a good fit, breathable, and has withstood some pretty...
-
Jjcarruthers2 replied to the thread F6 Van, brake pedal push rod.As part of your brake overhaul, I'm assuming you changed the rear brake cylinders and changed/overhauled the front brake calipers?
-
BBarnster replied to the thread F6 Van, brake pedal push rod.I tried all four corners, starting with NSR (RHD) pumping the pedal with an assistant, more than 100 times., just in case there was a...
-
Jjcarruthers2 replied to the thread F6 Van, brake pedal push rod.Hi Have you tried bleeding the brakes starting with the furthest bleed nipple away from the master cylinder first, then the second...
-
BHi all, Back to the F6 (R2370) while I wait for parts for the R5. I've reconditioned all the brakes (lines, pads, disks, shoes, pipes...
-
You can remove the engine by lifting the gearbox and putting a plank of wood between the gearbox and front crossmember and push it back... -
EHi all I've recently acquired this 1985 van, which was imported from France in 2018 and appears to have been well cared for and...
-
You can remove the engine by lifting the gearbox and putting a plank of wood between the gearbox and front crossmember and push it back...
