John M
Enthusiast
- Messages
- 87
- Location
- Yorkshire
My clutch release shaft is very stiff. I tried WD40 sprayed over the offending bearings but no luck.
I finally got my gearbox out and am now looking at removing the relsase shaft. The actuating fork is fastened to the shaft with what looks like two pins arrowed in the picture below.
Are they pins that have been driven in and if so how does one get them out?
Thanks chaps.
I finally got my gearbox out and am now looking at removing the relsase shaft. The actuating fork is fastened to the shaft with what looks like two pins arrowed in the picture below.
Are they pins that have been driven in and if so how does one get them out?
Thanks chaps.