Martin Hall
Enthusiast
- Messages
- 88
Hi
Just got back from a controle technique
After spending over a month and several rolls of Mig wire later The car only failed on exessive co2 emissions
What is the procedure for reducing this ?
I have searched back on the archives and there seems to be mention of turning the mixture screw right in then out 1.5 turns Only trouble is my carb does not have a mixture screw only slow running adjustment screw
Would it be an idea to replace the carb with a older one with mixture screw or is there another method I have checked the air filter etc
The car is running sweet as a nut otherwise
By the way the car is a 4 clan R1123
Thanks in anticipation
Martin
Just got back from a controle technique
After spending over a month and several rolls of Mig wire later The car only failed on exessive co2 emissions
What is the procedure for reducing this ?
I have searched back on the archives and there seems to be mention of turning the mixture screw right in then out 1.5 turns Only trouble is my carb does not have a mixture screw only slow running adjustment screw
Would it be an idea to replace the carb with a older one with mixture screw or is there another method I have checked the air filter etc
The car is running sweet as a nut otherwise
By the way the car is a 4 clan R1123
Thanks in anticipation
Martin