Renault 4 Chassis Jig

[nemawa]

Where is rear suspension jig page on forum?
I think that is little error in dimension. point a in on 44mm from top, and point d is 15mm from top. But i find that this distance need to be 28mm.(on attachment on chassis jig page) On your version is 29. On attachment is two values. 28 + 0, and 28 + 2. Did you know what is differences?

 

[perc]

Rear suspension mounting

Hi to all,
I found lots of information on this forum but I need some more
Can you give me measurements of rear body reinforcement seen on picture 3 (from top) on: http://www.renault4.co.uk/gordini-outerrrsusp.htm
As you can see on attached picture, complete right side is gone by the roast and I could not found any replacements over the net, so I need sizes or any hint where can I found chassis parts to buy.
Thanks for help.

 

[John Doe]

You can find some parts over here http://www.franzose.de/en/Renault/R4/Chassis/ but since I see you are from Slovenia sourcing a chassis in a better condition should not be the problem

 

[malcolm]

I don't have dimensions for that part. I copied the original part. There should be enough left on yours for you to do the same.

Renault used to supply repair sections for the outer suspension mounting. It's probably worth trying them. Otherwise try Der Franzose or Melun Retro Passion They might have repair sections.

The new parts will need to be welded in the right place. There are dimensions on http://www.renault4.co.uk/suspension-jig.htm

 

[Steve Hennessey]

I think I've seen them on the Wind Classics web site.

 

[perc]

Great pages, thanks!